Aluminum Alloy Ingots for Die Casting
Aluminum Alloy Ingots for Die Casting
In numerous casting alloys, the aluminum casting parts is light and has better ability to endure the higher temperature condition to operate. The aluminum die casting not only has higher intensity and rigidity, but shows the premium ability of corrosion resistance and the thermolysis, therefore, it is ideal products which used in the all kinds of harsh environment. In general, the tooling life of aluminum alloy in much shorter than zinc die casting tooling. In addition, the tolling expenses is also higher.
Characteristic of Aluminum alloy
- Good ability to operate in high temperature environment
- Light weight
- Good rigidity and intensity
- Outstanding thermolysis
- High repaired Characteristic
- Remarkable corrosion resistance
- Excellent electromagnetic wave covered performance
- High strength and hardness
- High conductive performance
- Abundant recycling
|
|
Si | Fe | Cu | Mn | Mg | Ni | Zn | Sn | Al |
| ADC3 | 9.0-10.0 | 0.9 | 0.6 | 0.3 | 0.4-0.6 | 0.5 | 0.5 | 0.1 | Bal |
| ADC5 | 0.3 | 1.1 | 0.2 | 0.3 | 4.1-8.5 | 0.1 | 0.1 | 0.1 | Bal |
| ADC6 | 1.0 | 0.6 | 0.1 | 0.4-0.6 | 2.6-4.0 | 0.1 | 0.4 | 0.1 | Bal |
| ADC10 | 7.5-9.5 | 0.9 | 2.0-4.0 | 0.5 | 0.3 | 0.5 | 1.0 | 0.3 | Bal |
| ADC12 | 9.6-12.0 | 0.9 | 1.5-3.5 | 0.5 | 0.3 | 0.5 | 1.0 | 0.3 | Bal |
| ADC1 | 11.0-13.0 | 0.9 | 1.0 | 0.3 | 0.3 | 0.5 | 0.5 | 0.1 | Bal |
Application of Aluminum alloy parts
- Electronic and electric
- Mechanical facilities
- Transportation
- Military industry
- Architecture
- Family products
PREVIOUS：Aluminum Sand Casting
NEXT：CNC Precision Machining
